物料在乳化機均質鍋內通過鍋內攪拌框上的聚四氟乙烯刮 板(刮板始終迎合鍋體內壁，掃凈掛壁粘料)，不斷產生新界面， 再經過框式攪拌器及與其反向的攪拌葉，將物料剪斷、壓縮、折 疊，使其攪拌、混合而向下流往鍋體下方的均質器處，再通過高 速旋轉的轉子與定子之間所產生的強力的剪斷、沖擊、亂流等過 程使物料在剪切縫中被切割，迅速破碎成200nm - 2μm的微 粒。物料微粒化、乳化、混合、調勻、分散等可于短時間內完 成。由于均質鍋內處于真空狀態，物料在攪拌過程中產生的氣泡 被及時抽走。乳化機均質結束后升高鍋蓋，按下傾倒按鈕開關可 使鍋內物料排向鍋外容器內(或者打開鍋底閥及加壓閥門直接排 料)。

Material in the homogenizing tank can be peeled off from the inner wall by the PTFE scraper fixed onto mixing agitator. The material is sheared, compressed, folded, stirred, mixed and flowed down to the homogenizer below the tank. And then flow through high speed rotating part of rotor and stator. The impact, turbulence and other processes cause the material to be cut in the shear seam and quickly broken into particles of 200 nm to 2 μ m.